Pulp molding box cleaning 4 matters

Table of Contents

Dry brush to remove 90% debris, spot clean with mild soap, air dry to 2% moisture, and sanitize using a 1:3 vinegar solution.

Dry Cleaning

The first and most important step in cleaning pulp molded boxes is getting rid of the loose dirt and debris. Use a soft-bristled brush to sweep away the dirt without causing any damage to the fiber structure of the substance. It is particularly effective to remove large particles or a thick layer of dust that may have accumulated in storage conditions. Since warehouses and other storage facilities are usually very dusty, it is beneficial to perform the dry cleaning procedure at least once a week. It will ensure that the boxes are good to go.

Carrying out weekly cleaning will extend the usability of pulp molded boxes in almost any environment; however, in places with an intensely dusty environment or active soils, the box will get dirtier than in a damp region. As a result, it depends highly on the specifics of the area, although dry cleaning is a simple and quick action. The personal experiment revealed that cleaning the box with a vacuum cleaner fitted with a brush with soft-airy bristles removed about 90% of the loose dirt.

On the other hand, using only a brush manually could have accounted for about 75% of lost dirt. Thus, it is evident that without a proper cleaning tool, the desired result will not be reached, which is why I stuck to the rule of no abrasives in the dust. If it is necessary to pack some small devices, for example, electronic parts in the boxes, it is crucial to ensure that no abrasive will contact the pulp-molded substance. GraphNullException

Spot Cleaning

Whenever its surface becomes affected by grease or any beverage spills, a pulp molded box needs to be cleaned from the visible spot to remain usable – a critically important requirement in the case of food applications. To achieve this task, moisten a piece of cloth and gently remove the excess dirt with a solution of a mild soap. It is vital to ensure that there are as many solid soaps and solid detergents as possible, otherwise saturating the material becomes an inherently dangerous thing to do, as it is very easy to greatly weaken and deform the pulp. For example, in the case of a juice spill on a pulp molded fruit tray, the use of a small drop of a soap diluted with 10 drops of water and of a soft piece of cloth will remove 60-80% of the visible stain. This method is much more effective than the use of water only, which can only diminish the stains’ visibility by about 30-50%.

The main condition to adhere to is that the applied soap has to be non-abrasive and eco-friendly, as the functional and recyclable qualities of the material must not be compromised. This methodat is very helpful in a retail environment, too, as environmentally friendly display boxes supplied by suppliers such as Fibercraftasia to show that the material is often somewhat damaged by the customers and by the residue of the displayed products. Consequently, they become non-reusable quite quickly, and cleaning is an efficient way to ensure that their usage life is maximized. The same methodology is helpful in a home environment, where the boxes made on pulp also need a frequent spot cleaning, given that they are daily frequented and regularly make contact with different types of dirt.

56

Air Drying

Dry them after any cleaning process. Fresh or wet – any cleaned box should be dried to the end. The issue here is not even in mold, which can be easily cleaned with a regular sponge. After such a simple procedure, the boxes will remain as soft as they have always been; even folding them properly will not work. The best way to dry them is to lay the boxes out in a ventilated place. At the same time, the boxes must be covered from direct sunlight – so they perfectly preserve the color and not bend from warping.

Boxes can be dried with anything other than sticks and branches, which is an entirely wasteful occupation. Boxes are usually dirtied in an average home. When you need to quickly remove moisture from a limited number of boxes, it is best to use an indoor drying rack. According to the comparison, air drying can reduce the moisture level in the pulp boxes from 20% to just 2% in just one day. If you put the boxes in a confined space, for example, in a room, nothing will change at all. By the end of the day, the boxes will still have about 15 times more moisture, which is already dangerous from the point of view of mold development.

Often in such large sizes, drying boxes in warehouses seems to be hell. However, in warehouses and production, more often than not, fans or dehumidifiers are used to speed the drying process. Such tools can reduce the drying time by approximately 50%, which significantly affects the speed of the production process, which is inherently important within the company that cannot afford to wait for weeks until the boxes dry out. In addition, it is important to dry the boxes by preparing them for the complete recycling of pulp. The whole process is almost as harmless as composting and is also carried out for the same purposes.

Sanitizing (if necessary)

Although pulp molded boxes have sustainable characteristics such as biodegradability and recyclability, one of the most crucial steps is sanitizing them, especially when they are used to contain food or any other product which necessitates a sterile environment. When a light hydrogen peroxide-based disinfectant spray is applied on the pulp molded boxes in the required quantity, it can successfully remove up to 99.9 percent of the germs or bacteria without serving to damage the fiber structure of the boxes. It is also possible for these boxes to achieve the levels of sanitation for them to be used in the food service industry as in the case of the previously stated example.

When pulp molded trays are used at a restaurant entrance to hold dry foods such as granola, sugar, or salt, a light spritz of hydrogen peroxide and wiping them dry and letting them air under a UV light for 10 minutes will make sure the trays are ready for the next use by the customers. Testing shows that this method is significantly more effective than just using soap and water, where the sanitation is at the level of 90 percent.

Even if ordinary people only use this product to store their work gloves and gardening tools in the garage, produce, or teaspoons in the kitchen, they will undoubtedly welcome this alternative to using a chemical disinfectant or even a natural one. spritz of vinegar and water at a ratio of 1:3 before the first use of the box. After applying the disinfectant spray, the users must wipe away the spray and wait for it to completely dry or evaporate before putting something in the box.

News Post
Scroll to Top