What is the use of moulded pulp tray

Table of Contents

Moulded pulp trays are used for eco-friendly packaging, offering superior protection for fragile items, reducing breakage rates by up to 30%.

Packaging Solutions for Various Industries

When discussing the protection and beauty of leather products with clients, one should essentially focus on using appropriated cleaning agents. It is vital since using the wrong product can have dire consequences and damage the item, reducing its life span and aesthetic value. The following are some of the products that fall into the “do not use” category:

  • Alcohol-based cleaners: agents that contain even some percentage of alcohol in them will dry out the leather eventually, turning it brittle and prone to cracking. Such products that can be found with 75% alcohol or ethyl alcohol as one of the ingredients in the customer’s possession may likely be hand sanitizer. When an alcohol-based agent is used, it absorbs and removes the oils that serve as a moisturizer, keeping leather soft.

  • Acetone or a nail polish remover: these products are too harsh for leat her. They break up its structure and cause discoloration. Therefore, products that contain these chemicals will make leather take all the dirt as they removed its protective coating. The material will be weakened as the chemicals continue to break it apart, eroding a few years of the item’s life expectancy in less than 20 uses.

  • Household cleaning sprays and wipes: they usually contain very harsh chemicals that are bad for leather. The chemicals often cause discoloration and break down the material.

  • Oils not suitable for leat her preservation: some oils, i.e. neatsfoot or mink oil , are meant to preserve leat her, whereas others such as olive oil or cooking oil will go rancid and induce mildew and bacterial development. They also deepen the material unevenly, lessening the desirability of using such products.

Reasons to Avoid these Products

  • Chemical damage: unsuitable chemicals will establish new pH levels on leat her that lead to unusual wear since it becomes repairable after a few uses.

  • Aesthetic damage: such chemicals will cause stains and change the colors of the settings while diminishing the finishing. The beauty of this material is mainly found on how the surface presents itself.

Suitable Agents for Cleaning Leat her

  • Use designated leat her cleaners.

  • Alternatively, use lukewarm water with mild soap on a soft cloth as the preferred solution for cleaning. Restrict the use of such a solution on minimum presentation uses and remember to use a leat her conditioner.


Protective Features for Shipping and Storage

Proper cleaning of a leather collar is crucial in maintaining its good looks and preserving it-life longevity. To avoid the latter demand and keep your belonging as fresh as new, follow the steps below as part of a detailed process.

Preparation for Cleaning

Gather Supplies: You will need a soft cloth, a soft brush or a dry sponge, a leather cleaner, and a leather conditioner. Always use cleaners specifically designed for leather to avoid the harmful effects of chemicals.

Check Documents: Always consult the care label or manufacturer’s notes before applying any cleaning substance. This is to avoid possible incompatibility of the cleaner with the collar’s specific type of leather.

Cleaning Process

Remove Dust: Brush the leather items to remove dust and dirt from all accessible parts. Avoid scratching the collar during subsequent cleaning stages.

Apply Cleaner: Wipe a soft cloth or a small brush soaked with a cleaner over the leather’s surface. Avoid soaking but ensure that the cleaner is moist. Work in gentle circular motion to press dirt and oils out of the collar.

Wipe the Cleaner: After cleaning, use another soft, clean, and damp cloth to wipe away any residue or remaining cleaner from the leather.

Let the Collar Dry: Sunlight or a heated air dryer can dry and stiffen leather and damage it. Leave the item to dry on its own without any outside help to avoid repair from a loss of natural moisture.

Conditioning and Preservation

Condition the Collar: Apply the leather conditioner to the dry and clean collar. Apply a “little goes a long way” principle by using a dime-sized volume of the conditioner. If leather seem greasy after application, use a soft cloth to wipe away excess cream.

Buff the Leather: Using a soft cloth, rub the collar to unbuff the leather and make the shine even. This also ensures a more even application of the conditioner across all outer surfaces of the collar.

Helpful Tips on Leather Maintenance

The cleaned and maintained leather should be cleaned once every two or three months. The recommended period can be shortened if the collar is exposed to active use in harsh conditions. Act promptly and clean any spills while they are still on the surface to avoid them drying up and sticking to the collar. To do so, treat spills with a clean cloth to absorb the moisture.


Tailoring to Product Specifics

Proper cleaning of the leather collar is crucial to value its appearance and years of service. The following steps will not only make sure that your leather is not damaged but will also offer a comprehensive approach to its cleaning.


Supplies: Make sure to have a soft cloth, soft-bristled brush, leather cleaner, and leather conditioner. It is recommended to use products specifically designed for leather to prevent inflicting chemical damage.

Manufacturer’s information: Always check the care tag or the manufacturer’s recommendation to ensure that the product is applicable for the leather type of your collar.


Dirt and dust: start by using a soft-bristled brush to gently remove any dust or dirt from the surface. This will make sure that no superficial scratches are afflicted during cleaning.

Applying leather cleaner: use a soft cloth and dampen it slightly with the cleaner. Remember not to use too much moisture and aim for the cloth to be only barely moist. Apply the cloth to the collar with circular motions to lift and eliminate dirt and oils.

Wiping off cleaner: after properly cleaning, use another clean, damp cloth to wipe off the cleaner. This will prevent the leftover cleaner from attracting new dirt.

Dry collar: leave the collar to air dry, and do not use any heating equipment for the acceleration. Hot air makes leather dry, brittle, and prone to cracking.

Conditioning and Preserving

Applying conditioner: once the collar is fully dry, apply conditioner. This should only require a small amount of the conditioner, which is usually a dime-sized volume. It will make sure that the product penetrates the collar and does not just get passed onto the pet. Conditioners replace oils carried away with dirt, keeping the leather soft and preventing it from cracking.

Buffing leather: once the collar is properly and evenly covered in a conditioner, use a soft cloth to buff the leather and bring out its shine.

Leather care tips

Cleaning interval: repeat the full cleaning process once every 2-3 months or more often if the collar is being exposed to harsher conditions. Proper care might extend the lifespan of a leather product fourfold, with neglected products only lasting around 5 years and well-kept items providing 20 years of service.

Spot cleaning: spills and stains should be treated immediately before they have a chance to settle within the leather. Make sure to blot and not rub the affected area with a clean cloth.

Innovative Design Approaches

To keep the integrity and appearance of leather products, it is essential to use proper cleaning agents. Inappropriate products will cause significant damage and reduce the longevity and appeal of your leather items.

Products to Avoid in Leather Cleaning

Alcohol cleaners – alcohol products can dry out the leather significantly, leading to brittleness and cracks . This includes household products like hand sanitizer and some wipes used for disinfecting . They will remove natural oils of the leather.

Acetone or nail polish remover – acetone breaks down the structure of the leather, causing it to lose its color and become weak. They can remove several years from a leather’s item lifespan because of the accelerated degradation .

Household cleaning sprays and wipes – although they have various uses, their chemicals are too heavy for leather. Over time, it will cause irrevocable damage like discoloration and breakdown of the material.

Improper oils – while the good oils, such as neatsfoot oils and minks are great for leather items, the improper ones, like olive oil and different cooking oils, can spoil and gather bacteria, leading to mold growth. The ill oils can also come different parts of the leather items and darken them unevenly, creating an unsightly appearance.

Why you should avoid these products

Chemical damage – they can alter the leather overtime permanently. The pH level of the leather often leaves it vulnerable to wear and tear. Therefore, keeping leather items clean and keeping them free of compounds that can change the natural pH balance cleans leather items by more than 50% than proper cleaning agents.

Aesthetic concerns – the improper cleaning products can stain, cause uneven coloring, and degrade the finish of the leather. The appeal of leather items depends heavily on their surface. Inappropriate cleaning agents destroy the unattended appearance the items had, which reduced its resale appeal and appearance of the item.

Proper leather cleaning solutions

Leather cleaners – always opt for the cleaner types specifically designed for cleaning leather. This product will clean the items and still supply the necessary pH balance.

Watered down soap – use water to dilute a small amount of pH soap , and use a soft cloth for scrubbing. Rinse the cloth and remove the soap. Finally, apply leather conditioners to replace the lost moisture.

Professional undertakings – if you do not feel you can handle the spots and stains appropriately and are unsure of a given product’s impact on your leather items, it may be wise to approach a professional leather cleaner.

News Post
Scroll to Top